loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
sharethis sharing button

T20A - 9M Lifting Height with15KG Safety Loading Weight

T20A is designed specifically for medium sized stage installations, cultural tourism performances, and fixed installation scenarios. 9 meter lifting height with 15kg safe working load, with high precision of lifting position, balancing load capacity with installation flexibility. It serves as the power core for medium sized lighting fixtures, dynamic props, and lifting backdrops.

Slack Rope Protection: Automatically stops the winch when underload is detected.
Mis-spooling Protection: Real-time detection of cable mis-spooling or groove jumping.
Overload Protection: Immediate alarm and shutdown when the limit is exceeded.
LINK Protection (Teamwork): Through local area network (LAN) communication and interlocking logic between winches, a single unit failure triggers a full-system safe stop, ensuring hoisting safety at the system level.
Availability:

 General


Model Name

T20A
Lifting Height

9M
Safety Loading Weight

15KG
Max Speed

70 CM/S
Synchronization Error

< 6MM
Ambient Temperature

-10~ 50
Lifting Cable Diameter

Ø7MM
IP Rating

IP 20
Winch Size

302*231*497 MM ( with Clamp attached )
Winch Weight

13.4KG
Installation

Vertical Lifting
Tilt Degree

N/A
 Electrical & Control


Control Mode

DMX-512
Channel

9CH/12CH/4CH+
 Fixture Pixel Control 

MAX 75 LED pixels (RGBW)
Voltage

AC90V-240V/50-60HZ
Output Mode

24V_150W/220V_1300W/RJ45/DMX
Power Consumption

400W MaxExcluding power thru to fixtures)
RDM

Standard
 Safety


Safety Security

Physical Brake, Electronic Speed Limiter
E-Stop Interface

Customizable
LINK(Teamwork)

Standard (Interlock across multiple units)
Slack-Rope Detection &
 Protection


Standard
 Interface


Connectors

3PIN/5PIN XLROptional)
Power In/Out

 PowerCon® True1
Display Panel

4 * Digit 7-Segment Display
External Pixel Control
 (for controlling pixels via
different signal source)


Customizable Plug Manual Switch
 Content of Package


Packaging

Carton/Flight case
T20A

1 * UNIT
DMX Cable

2 * 0.5* 2m * 1pcs
PowerCon® True1 Cable

3 * 1.25* 2m * 1pcs
Safety Wire

3mm * 430mm * 1pcs
Aluminum Clamp

30mm * 110 mm * 82 mm * 2pcs


Previous: 
Next: 
Product Inquiry
CONTACT
Mobile : +86 135 4453 0008
Wechat ID : DMX-winches
Facebook : ginyu8@gmail.com
Email : ginyu8@gmail.com
WhatsApp : +86 135 4453 0008
Wedsite: www.dmx-winches.com
Factory address : 
Room 101, 6 Building, No.15 DongSheng Road, Xinya Street, Huadu District, Guangzhou, P.R. China
 
Contact Us
Copy RIght © GINYU Kinetic Art Workshop® All Rights Reserved.